Power Distribution Unit with K-Rated Transformers

1 Transformer
2 Double wound , High Isolation
3 Double sized neutral
4 Insulation class
5 Regulation is better than 3.5%
6 Overload rating of 100% for 10 secs
7 Core of CRGO and conductor of copper
8 Natural / Forced Air Cooled
9 As per IS:2026 standards
10 Attenuation – 80 db CMRR and 60 db CMNR
11 Primary connect as DELTA, secondary connection as STAR
12 Efficiency of the transformer is minimum 98% 2 Power Distribution
13 Floor mounting Panel board with MS angles and Ms sheets with powder coated Paint and suitable provisions for cable
14 Distributed outgoing through sub branch breakers and branch breakers
15 Extra sub breakers also provided
16 Suitable capacity 3 pole incomer 3 Metering & Indications
17 LED indications provided to read the availability of incoming supply
18 Multi parameter reading meter to read Voltages, currents and power is incorporated Power distribution unit is fitted with multiple outputs designed to distribute electrical power. In a data centre, all the distributed power loads are connected through a non linear power source, due to which HARMONICS generation is unavoidable. These generated Harmonics are flow back and directly effects the mains power source, which a UPS. The effect of harmonics derates the capacity of UPS. Hence 100% utilization of UPS capacity becomes wasted. The effect of harmonics also creates much heat in the transformers of UPS. To eliminate these direct effects on UPS, KFactor Transformers are designed based on the harmonics present the load. The special design of K-Factor Transformer helps us to depend on much to eliminate or withstanding from the effects of Harmonics.